Alpine PKG-RSE2 - Manual (Page 12)

10
-EN
Basic Operations
Top Front Side
Front Control Keys
POWER MUTE
Remote Control
T i g P e ON/OFF
The power state of the monitor is memorized when Ignition/ACC is
turned off. When Ignition/ACC is turned back on, the monitor returns
to the memorized power state (either ON or OFF), including DVD
playback position. .
Front Control Keys
1
Press POWER to turn ON.
2
To turn off the power, press and hold POWER
again.
• While the power is ON, press POWER to activate the Mute
function.
Remote Control
1
Press POWER to turn ON.
2
To turn off the power, press POWER again
Front Passenger Controls
1
Press PLAY/PAUSE button to turn ON.
2
To turn off the power, press and hold PLAY/
PAUSE.
L adi g a d U l adi g Di c
Turn on the power before loading and unloading discs.
Loading discs
Insert the disc with the label side facing upwards.
Once the disc is partially inserted, it is drawn in automatically.
Playback starts.
• If the ignition key is on ACC or ON, a disc can be inserted even
when the power is OFF.
• For two-sided DVDs, play one side of the disc to the end, then
unload the disc, turn it over and reload it to play the other side.
• Never insert map discs for navigation purposes as they could
damage the equipment.
• If wrong disc, upside-down discs or dirty discs have been inserted,
“DISC ERROR” is displayed. Press and eject the disc.
Unloading discs
Press .
Be sure to remove the disc.
• If the disc is not removed within a few moments, it will be reloaded
automatically.
• If the ignition key is set to ACC or ON, a disc can be removed even
when the power is OFF. After removing the disc, the power turns
OFF again automatically.
• During ACC OFF or while the disc is being loaded (“LOADING”
is displayed), the disc will not be ejected even if you press .
A di M e F c i
Front Control Keys
1
While the power is ON, press POWER to activate
the Mute function.
2
Press POWER again turn it OFF the Mute function.
Remote Control
Press MUTE to turn it ON and OFF.
MONITOR SETUP