Panasonic MC-UG327 - Manual (Page 26)

Using Tools
Wand
Tube
Tubo
Crevice Tool
Suceur plat
Herramienta
para
hendiduras
NOTE: Hold the handle to support the
vacuum cleaner when using tools and
disconnecting or attaching the hose.
➢ Disconnect the hose & wand from
the vacuum cleaner.
➢ Pull the wand gently in the direction
of the arrow to disconnect.
➢ It may be necessary to slightly twist
the hose handle to loosen from the
nozzle hose.
➢ Attach crevice tool or dusting brush
as needed.
➢ Air turbine, crevice tool and dusting
brush can attach to either wand or
hose.
➢ For additional reach, the dusting
brush may be attached to the end of
the crevice tool.
CAUTION
• DO NOT overextend your reach with
hose as it could tip vacuum cleaner.
Wand
Tube
Tubo
Dusting Brush
Brosse à épousseter
Cepillo para sacudir
Air Turbine
Turbine à air
Turbina de aire
Crevice Tool
Suceur plat
Herramienta para
hendiduras
CAUTION
Selector should be placed in BARE
FLOOR (TOOLS) position when
using vacuum cleaner on bare floors
and when using tools.
Incorrect setting my cause floor or
carpet damage.
- 26 -