Panasonic FV-05VFL2 - Manual (Page 12)

12
Fig.21
(1) To install the ventilating fan, follow the procedures described in lnstallation . Take the following
precautions before installation.
II
1. Installation in existing construction.
Installing the ventilating fan in an existing building requires an accessible area (attic or crawl space) above
the planned installation location or existing ducting and wiring.
CAUTION:
Check area above planned installation location to be sure that:
1. Duct work can be installed and that area is sufficient for proper ventilation.
2. Wiring can be run to planned location.
3. No wiring or other obstructions will interfere with installation.
(2) Inspect duct work and wiring before proceeding with installation.
(3) Plan suitable location for ventilating fan. (next to ceiling joist)
(5) First, remove ceiling section according to Fig.6 of page 8.
(6) Install ventilating fan.
(1) Inspect duct work and wiring before proceeding with installation.
(2) Remove ceiling section according to Fig.6 of page 8.
(3) Install ventilating fan.
(4) Before installation, provide inspection and maintenance access at a location that will not interfere
with installation work shown in installation .
II
2. Installation from accessible area above fan location.
4. Follow steps 5 to 11 of installation (page 7,page 8)
to complete the installation work.
I
6-Long screws
(M4X30)
Adaptor
Circular duct
Conduit
Junction box
Wire nut
Lead wires
Green wires