Panasonic DMRE75V - Manual (Page 60)

Advanced Operations
60
You can transfer (dubbing) programs recorded on a disc ° onto a tape
with one stroke of the button.
In One-Touch Dubbing, all contents on the disc are automatically
dubbed onto the tapes.
° Available discs for transfer (dubbing) onto tape are DVD-RAM and
non-finalized DVD-R. Most DVD videos cannot be dubbed
because they are copy-guarded.
Preparation
≥Select the unit viewing channel (or the AV input) on the TV.
DVD
≥Insert the disc containing the program to be copied (
l 20).
VHS
≥Insert a video cassette with an intact erasure prevention tab.
( l 48)
≥Confirm that the remaining tape time is sufficient for recording.
( l 57)
≥Select the recording mode.
[1]
While both DVD/VHS are stopped,
Press and hold [VHS —, DUBBING] for 3 seconds
or more.
On the main unit, press [VHS —].
≥Check if transfer (dubbing) starts properly.
≥The [DUBBING] indicator on the main unit lights.
≥Dubbing is automatically completed when playback of the disc
is finished or the tape reaches its end.
∫ To stop transfer (dubbing) halfway through
Press [ ∫, STOP].
≥When transfer (dubbing) is completed, a message indicating the
end of transfer (dubbing) appears on the TV screen and then
disappears a few seconds later.
∫ When transfer (dubbing) is started, the following
operations also start automatically:
≥“Status Messages” on Display ) “Off” (l 45)
≥Recording channel indication on VHS ) “DC”
≥Output to TV ) VHS output
≥Audio output when playing back DVD ) Stereo (L R) [RAM]
∫Only the following operations are allowed while
transfer (dubbing):
≥Stopping transfer (dubbing) by pressing [∫, STOP].
Note:
≥While One Touch Transfer (Dubbing) is activated, timer recording
cannot be started.
≥When “DVD/VHS Output” is set to “Manual” ( l 43), or when DVD
output is selected in starting transfer (dubbing), the output is
switched to VHS automatically at the time when transfer (dubbing)
is started.
- When the transfer (dubbing) is already started, you cannot switch
the output manually.
≥When the transfer (dubbing) is not started or not executed, the
“DUBBING” indicator blinks for about 7 seconds. Check if the unit is
properly prepared.
≥If you start transfer (dubbing) when “PB” is blinking on the unit’s
display, the DVD is dubbed from the beginning of the title which
you stopped.
Transfer (Dubbing) from DVD
PROG/CHECK
DVD REC VHS REC REC MODE ADD/DLT
DUBBING
VHS DVD
TIME SLIP
CHAPTER
JET REW
STATUS DISPLAY
DVD ERASE
VHS
DVD
SKIP/INDEX
SLOW/
SEARCH REW FF
PLAY
POWER
FUNCTIONS DIRECT NAVIGATOR
TOP MENU VHS MENU
CM SKIP CANCEL/RESET
VOLUME CH INPUT SELECT
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS DVD
TRACKING/V-LOCK
DVD/VHS POWER
VCR Plus+
OUTPUT
REC MODE
1
;
∫
CH, W, X
µ, VHS REC
VHS —
:, 9
OPEN/CLOSE TIME SLIP
REC CH
/ k1.3
DUBBING VHS DVD
DUBBING indicator
∫ One Touch Transfer (Dubbing) (DVD l VHS)
∫About Recording VISS ( l 55)
In One-Touch Dubbing from DVD to VHS, the index signal is
automatically recorded for each title. You can search desired
titles with [
: ] or [ 9].
VHS DVD
PP-Sample.book 60 ページ ２００４年３月８日 月曜日 午後６時３分