Panasonic DMRE75V - Manual (Page 58)

58
[[DVD/VHS]]
Advanced Operations
[RAM] [DVD-R]
You can transfer (dubbing) programs recorded on a tape onto a disc
°
with one stroke of the button.
In One-Touch Dubbing, programs are automatically dubbed onto the
disc from the location of playback on the tape.
° Available discs for transfer (dubbing) from tape are DVD-RAM and
non-finalized DVD-R.
Preparation
≥Select the unit viewing channel (or the AV input) on the TV.
DVD
≥Release protection (disc
l 30, cartridge l 18). [RAM]
≥Insert a disc and confirm there is sufficient empty space for
recording on it. ( l 20, 47)
≥Select the recording mode.
≥When SAP broadcast program is played back on VHS, the audio
on DVD is recorded according to the settings in “Select MTS” in the
initial settings. (
l 44) [DVD-R]
VHS
≥Insert the video cassette containing the program to be copied
( l 48).
[1] While both DVD/VHS are stopped,
Press and hold [ “ DVD, DUBBING] for 3 seconds
or more.
On the main unit, press [ “ DVD].
≥Check if transfer (dubbing) starts properly.
≥The “DUBBING” indicator on the main unit lights.
≥Dubbing is automatically completed when the tape reaches its
end or the disc becomes full.
∫ To stop transfer (dubbing) halfway through
Press [ ∫, STOP].
≥When transfer (dubbing) is completed, a message indicating the
end of transfer (dubbing) appears on the TV screen and then
disappears a few seconds later.
∫ When transfer (dubbing) is started, the following
operations also start automatically
≥“OSD” on VHS MENU ) “OFF” (l 56)
≥Recording channel indicator on DVD ) “TP”
≥Output to TV ) DVD output
∫Only the following operations are allowed while
transfer (dubbing)
≥Stopping transfer (dubbing) by pressing [∫, STOP].
Note:
≥While One Touch Transfer (Dubbing) is activated, a timer recording
cannot be started.
≥When “DVD/VHS Output” is set to “Manual” ( l 43), or when VHS
output is selected in starting transfer (dubbing), the output is
switched to DVD automatically at the time when transfer (dubbing)
is started.
- When the transfer (dubbing) is already started, you cannot switch
the output manually.
≥When the transfer (dubbing) is not started or not executed, the
“DUBBING” indicator blinks for about 7 seconds. Check if the unit is
properly prepared.
≥When a Copy-guarded tape is inserted, a message appears on the
display and the recording stops on the spot.
≥If a part of the tape recorded in VP mode is dubbed to disc, noises
may appear at the beginning of the dubbed part.
Transfer (Dubbing) from VHS
VHS
DVD
PROG/CHECK
DVD REC VHS REC REC MODE ADD/DLT
DUBBING
VHS DVD
TIME SLIP
CHAPTER
JET REW
STATUS DISPLAY
DVD ERASE
SKIP/INDEX
SLOW/
SEARCH REW FF
PLAY
FUNCTIONS DIRECT NAVIGATOR
TOP MENU VHS MENU
POWER
CM SKIP CANCEL/RESET
VOLUME CH INPUT SELECT
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS DVD
TRACKING/V-LOCK
DVD/VHS POWER
VCR Plus+
OUTPUT
REC MODE
1
;
∫
CH, W, X
µ, DVD REC
“ DVD
OPEN/CLOSE TIME SLIP
REC CH
/ k1.3
DUBBING VHS DVD
DUBBING indicator
∫ One Touch Transfer (Dubbing) (VHS l DVD)
∫Dividing a title to be dubbed
In One-Touch Transfer (Dubbing) from VHS to DVD, the title is
divided by index signal detected and then recorded. You can
search desired titles with Direct Navigator’s Title View (
l 33)
after transfer (dubbing) to DVD.
≥Titles recorded within 15 minutes (25 minutes in VP mode) of
each other may not be divided properly.
≥The recording time may become longer than the original title
depending on the number of index signals.
VHS DVD
PP-Sample.book 58 ページ ２００４年３月８日 月曜日 午後６時３分