Panasonic KXTG7742 - Manual (Page 48)

– press MSP-PHONEN on the base unit 2
times. (KX-TG7741 series: page 3)
Switching between the base unit and
your headset
You can switch between the base unit and
your headset:
– during a landline call with the base unit
speakerphone. (KX-TG7741 series: page 3)
– during an intercom call between the base
unit and handset. (KX-TG7741 series:
page 3)
– while listening to messages recorded on
the base unit answering system. *1
n KX-TG7741 series: page 3
To switch to your headset:
Press MHEADSETN on the base unit.
To switch to the base unit:
Press MSP-PHONEN on the base unit.
*1 KX-TG7731 series: page 3
R You can only switch from the base unit
to your headset. Turn on the headset
referring to your headset operating
instructions.
Call sharing between your headset
and the handset
Important:
R To activate this feature, you should set call
sharing mode to on beforehand (page 38).
n While the handset is on a landline call:
To join the conversation with your
headset, turn on the headset referring to
your headset operating instructions.
n While your headset is on a landline call:
To join the conversation with the handset,
press M
N.
Adjusting your headset receiver
volume
Base unit
Press MjN or MkN repeatedly while using your
headset.
48 For assistance, please visit http://www.panasonic.com/help
Using Bluetooth Devices
TG7731_41_(en-en)_1121_ver.021.p48 48 2011/11/21 12:02:14