Alliance Laundry Systems SF18VNV - Manual (Page 16)

Installation
14 F232060 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Dimensional Clearances
Both single and multiple machine installations
require specified minimum clearances on all
sides of each machine. The table below shows
these clearances.
See Figures 2 and 3 for dimensions of
18-pound and 25-pound capacity models.
Figure 4 provides installation guidelines for
sites with multiple installations.
Note: The dimensions shown here are for
planning purposes only. They are approximate
and subject to normal manufacturing
tolerances. If exact dimensions are required
for construction purposes, contact the
distributor or manufacturer. We reserve
the right to make changes at any time
without notice.
Cabinet Freestanding
Recommended Minimum Clearances
18
[in (mm)]
25
[in (mm)]
Minimum rear clearance 12 (305) 12 (305)
Minimum clearance between machine and wall 2 (50) 2 (50)
Minimum clearance between machines (side) 1 (25) 1 (25)
Minimum front clearance 16 (406) 17.5 (445)