Panasonic KXTGA820FX User Manual
Page 8
8
Registering the handset to the KX-TG8200/KX-TG8220 base
unit
Ensure that the handset is switched on. If it is not on, press and hold {ih} for
few seconds to turn the handset on.
1
Lift the handset and press {ih}. Place the handset on the base unit.
• Continue the operation even when the handset display shows
“
Please Wait...
”.
2
Proceed with the operation for your model.
N
KX-TG8200
Press and hold {x} on the base unit for about 5 seconds. (No registration
tone)
N
KX-TG8220
Press and hold {x} on the base unit for about 5 seconds, until the
registration tone sounds.
3
With the handset still on the base unit, wait until a confirmation tone sounds
and w stops flashing.
Note:
• If an error tone sounds, or if w is still flashing, register the handset according
to the base unit’s operating instructions.
• If all registered handsets start ringing in step 2, press {x} to stop. Start again
• The KX-TG8200 does not feature an answering system.
• Answering system features are available only when this handset is registered
to the KX-TG8220.
TGA820FX(fx).book Page 8 Friday, July 27, 2007 8:38 PM