Antec SOLO II User Manual
Page 25
25
4.3
O
PTIONAL
F
ANS
The SOLO II can accommodate two 120 mm front intake fans. The following shows you how to install
one of thesefans using a 120 mm TrueQuiet™ fan:
1.
Remove the fan filter as depicted in section 4.2.
2.
Insert the mounting pin through the mounting hole tail-first. Pull the tail through the hole and
push the pin through with the head of the pin. Apply a firm, consistent force, but do not yank
the pin through.
3.
If this is your desired final position for the fan’s position, you may clip the tail of the mounting
pin.