Antec SOLO II - Manual (Page 12)

12
2. The TrueQuiet™ fan has two small black clips attached to the fan’s two-speed switch. With your
thumb and forefinger, spread the clips while pushing from the rear of the case to remove the
switch.
3. Preparing the KUHLER H
2
O backplate is specific to your CPU socket. Please refer to the KUHLER
H
2
O installation guide, available at
http://www.antec.com/Believe_it/product.php?id=Mjc2OCYxNw == (KUHLER H
2
O 620) or
http://www.antec.com/Believe_it/product.php?id=NzA0MzcwJjE3 (KUHLER H
2
O 920) for more
information.
4. Prepare the retention ring according to the CPU socket you’re using.
5. Complete installation according to the KUHLER H
2
O instructions.
2.4 P OWER S UPPLY I NSTALLATION
We recommend removing the PSU support beam to facilitate installation. The power supply support
beam has two screws on both sides: two attached to the 5.25” drive cage and two at the rear.
1. Locate and remove the first screw on the drive cage.