Antec SOLO II - Manual (Page 15)

15
2. Attach the drive rails to your 5.25” device. These rails have three depth settings that
accommodate the depth of your 5.25” drive.
3. Make sure to properly align your drive rails with your 5.25” drive. We recommend attaching one
rail with one of the 5.25” drive screws and closing the bezel as a trial. Use the four 5.25” drive
screws to secure your drive.
4. Slide the 5.25” drive into the appropriate drive bay. You will know the drive is secure when you
hear a “click.”
5. Mount any other 5.25” devices accordingly.