Panasonic KXTGA828FX - Manual (Page 8)

8
Note:
• If you select a language you cannot read: {ih} i " i N i # i
{V} 2 times i # i {V} 3 times i # i {^}/{V}: Select the desired
language. i # i {ih}
Registering the handset to the KX-TG8280 base unit
Ensure that the handset is switched on. If it is not on, press and hold {ih} for
few seconds to turn the handset on.
1 Lift the handset and press {ih}. Place the handset on the base unit.
• Continue the operation even when the handset display shows
“ Please Wait... ”.
2 Press and hold {INTERCOM} on the base unit for about 3 seconds, until the
registration tone sounds.
3 With the handset still on the base unit, wait until a confirmation tone sounds
and w stops flashing.
Note:
• If an error tone sounds, or if w is still flashing, register the handset according
to the base unit’s operating instructions.
• If all registered handsets start ringing in step 2, press {INTERCOM} to stop.
Start again from step 1.
TGA828FX(fx).book Page 8 Tuesday, August 28, 2007 6:35 PM