Panasonic KXTGA830FX - Manual (Page 5)

5
• When replacing the batteries:
- USE ONLY rechargeable Ni-MH batteries AAA (R03) size.
- Do NOT use Alkaline/Manganese/Ni-Cd batteries.
- We recommend using the Panasonic rechargeable batteries noted in the
base unit’s operating instructions for replacement battery information.
Place the handset on the charger for about 7 hours before initial use.
Note:
• The handset display may show “
Please Wait... ” when the handset is
placed on the charger if it is not registered to the base unit.
• If the batteries are fully charged, but the operating time seems to be shorter,
clean the battery ends ( S , T ) and the charge contacts with a dry cloth and
charge again.
Display language
16 display languages are available. You can select “
Deutsch
”, “
English
”,
“
Magyar
”, “
Polski
”, “
Sloven Č ina
”, “Č
eŠtina
”, “
Hrvatski
”,
“ Slovenscina ”, “ Eesti ”, “ LIETUVIŠKAI ”, “ LatvieŠu ”, “ Românã ”,
“БЪЛГАРСКИ”, “
Srpski
”, “МАКЕДОНСКИ”, or “
Shqip
”.
1
K (centre of joystick) i N i M
2
{V} /{^}: “ Display Setup ” i M
3
{V} /{^}: “ Select Language ” i M
4
{V} /{^}: Select your desired language. i M i {ih}
Note:
• If you select a language you cannot read: {ih} i K i N i M i
Push the joystick down 2 times. i M i Push the joystick down 4 times.
i
M i {V}/{^}: Select your desired language. i M i {ih}
Registering the handset to the base unit
Ensure that the handset is switched on. If it is not on, press and hold {ih} for
few seconds to turn the handset on.
1 Handset:
Lift the handset and press {ih}.
2 Base unit:
Proceed with the operation for your model.
N
KX-TG8301
Press and hold {x} for about 5 seconds. (No registration tone)
N KX-TG8321
Press and hold {x} for about 5 seconds, until the registration tone sounds.
TGA830FX(fx).book Page 5 Friday, April 4, 2008 10:37 AM