Panasonic KXTGA641FX - Manual (Page 5)

5
Battery installation/Battery charge
Important:
• Use the supplied rechargeable batteries. For replacement, we recommend
using the Panasonic rechargeable batteries noted in the base unit’s operating
instructions.
• Wipe the battery ends ( S , T ) with a dry cloth.
• Avoid touching the battery ends ( S , T ) or the unit contacts.
• Confirm correct polarities ( S , T ).
• USE ONLY Ni-MH batteries AAA (R03) size.
• Do NOT use Alkaline/Manganese/Ni-Cd batteries.
Place the handset on the charger for about 7 hours before initial use.
Note:
• The handset display may show “Please wait for 1 minute.” when the
handset is placed on the charger if it is not registered to the base unit.
• If the batteries are fully charged, but the operating time seems to be shorter,
clean the battery ends ( S , T ) and the charge contacts with a dry cloth and
charge again.
Display language
16 display languages are available.
If you select a language you cannot read:
1
{ih} i 8
2 Proceed with the operation for your model.
N
KX-TG6411
{^}
3 times i M
N KX-TG6421/KX-TG6451/KX-TG6461
{^}
4 times i M
3
{V}
2 times i M 2 times i {V}/{^}: Select your desired language. i
M i {ih}
When the language selection is displayed after installing the batteries for the
first time, you can select your desired language.
{V}
/{^}: Select your desired language. i M i {ih}
You can select
“ ”, “ ”, “ ”, “ ”,
“ ”, “ ”, “ ”, “ ”, “ ”,
“ ”, “ ”, “ ”, “ ”, “ ”,
“ ”, or “ ”.
TGA641FX(fx).book Page 5 Friday, February 27, 2009 9:17 AM