Panasonic KXPRWA10FX - Manual (Page 4)

4
PLEASE READ BEFORE USE AND SAVE
This unit is an additional handset compatible with the following series of Panasonic
Digital Cordless Phone:
– KX-PRS110 (KX-PRSA10)
– KX-PRW110 (KX-PRWA10)
(The corresponding models are subject to change without notice.)
You must register this handset with your base unit before it can be used. This
installation manual describes only the steps needed to register and begin using the
handset. Please read the base unit’s operating instructions for further details.
Supplied accessories
*1 Please read the base unit’s operating instructions for replacement battery information.
*2 The handset cover comes attached to the handset.
Note:
• Please read the base unit’s operating instructions for additional/replacement accessories.
• Please read “General information” of the base unit’s operating instructions for information
regarding R&TTE Directive.
Connections (page 2: 1)
A Connect the AC adaptor plug to the unit until you hear a click.
B Connect the AC adaptor to the power outlet.
C KX-PRSA10: Fasten the cord by hooking it.
Note:
• Use only the supplied Panasonic AC adaptor PNLV233CE.
• The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel
warm during use.)
Battery installation/Battery charging (page 2: 2)
Important:
• Use the supplied rechargeable batteries. For replacement, we recommend using the
Panasonic rechargeable batteries noted in the base unit’s operating instructions.
• USE ONLY rechargeable Ni-MH batteries AAA (R03) size (A).
Charger................................................. 1
AC adaptor/PNLV233CE ...................... 1 Rechargeable batteries
*1
..................... 2
Handset cover
*2
................................... 1
When the language selection is displayed after installing the batteries for the first time,
you can select your desired language.
{
r} : Select your desired language. s {OK} s {T}
English
PRSA_WA10FX(fx).book Page 4 Thursday, July 25, 2013 1:30 PM