Albatron Technology KI51PV-754 - Manual (Page 52)

Mainboard KI51PV-754
48
Before you rebuild a RAID Mirrored Array
Before you begin rebuilding a RAID Mirrored Array, you must copy the “NvRaidMan.exe” file
from the bundled CD Driver to your C: drive. [CD File Location Path => D: \ Driver \ nForce \
6.53 \ IDE \ WIN2K (or WINXP)\ NvRaidMan.exe]
To rebuild a mirrored array, bring up the NVIDIA RAID Utility. From the “Array List” screen,
select the array with the newly installed drive. Then go to the “Array Detail” screen (press Enter).
Then press the key and use the up/down arrow keys to select the hard drive that you just
installed. Then press . A confirmation message will display (as shown below). Press
to confirm. Then press to exit the “NVIDIA RAID Utility” setup.
Launch the NVRAID Management utility by double-clicking the NvRaidMan.exe that has been
copied to the C: drive. You can view the status of rebuilding under the Details section from the
screen as shown below.