Ariston AW122 - Manual (Page 6)

6
Washing Options
Option What it does... How to set it... Note
KNOBS
TEMPERATURE
Changes the preset wash water
temperature of the selected
program
Rotate TEMPERATURE
knob to the desired wash
temperature
Rinse water is always
COLD
•
SPIN SPEED
Changes/excludes the preset
spin cycle of the selected
program
Rotate SPIN SPEED knob
to the desired speed
Select for No Spin
Faster spinning will
extract more water
from highly absorbent
fabrics
•
•
BUTTONS
Soaking
Adds a one hour soak to the
selected washing program
Press
SOAKING button (in)
During soaking, laun-
dry is gently tumbled
•
Extra Rinse
Adds one extra rinse to the
selected Cotton Heavy Duty or
Permanent Press program
Press
EXTRA RINSE button (in)
Recommended for
very large loads, when
too much detergent is
used or for detergent
contact allergies.
•
Easy Iron
Automatically stops the selected
Permanent Press or Hand
Washables program before
the spin cycle begins. Laundry
soaks in water until the Easy
Iron button is pressed again.
Press
EASY IRON button (in)
Program will stop when it
reaches the symbol on
the Programs dial.
To resume the program,
Press EASY IRON button
again (out)
Prevents wrinkles
caused when laundry is
not removed promptly
from the drum.
Use this option when
you know you won’t
be able to remove the
laundry until long after
the cycle is finished.
•
•
Pre-Wash
Adds an extra wash to the
selected program
(Not available in “Wool” cycle)
Press
PRE-WASH button (in)
Recommended for
heavily soiled loads
like work clothes or
children’s clothes.
•
On PROGRAMS Dial
DELAY TIMER Delay’s the start of the
washing program by 1, 3, 9 or 12
hours so laundry is ready when
you are.
Rotate PROGRAMS dial
clockwise and select 1h,
3h, 9h, or 12h.
Press ON-OFF button (in).
Wait 5 seconds for the
ON-OFF light to stop
flashing.
Rotate the PROGRAMS
dial clockwise and select
a washing program.
1.
2.
3.
4.
The On-Off lamp will
flash (1 second on, 4
seconds off) to indicate
a Delay Start has been
set. The door can be
opened or closed at
any time before the
cycle begins.
•
Stop/Reset Cancels/Interrupts the
selected program
Rotate the PROGRAMS
dial clockwise to a
Stop/Reset position.
Wait 5 seconds.
Rotate the PROGRAMS
knob to the desired
washing program or
Drain (see right).
1.
2.
3.
To cancel a program
completely, select
(Drain). After the
washer drains, wait for
the DOOR LOCK light
to extinguish before
attempting to open the
door. •
Start and Programs