beautypg.com

Start and programs, Choosing a program, Lights – Ariston AW122 User Manual

Page 4

background image

4

Start and Programs

Choosing a program

Plug the washer into the electrical socket.

Sort your laundry according to similar colors,

fabrics and degree of soil. For best results,

do not load more than the maximum capacity:

Fabric

Maximum Load

Cottons

12 lbs.

Synthetics

6 lbs.

Delicate Fabrics

5 lbs.

Wools

3 lbs.

Bathrobes

5 lbs.

3. Open the door. Load the machine and make sure

the items are not in the way of the door seal.

4. Close the door.

5. Choose the wash program by checking the

Programs table (see Preset Washing Programs)

as well as the fabric care tags found on your

clothing.

Select a washing cycle by rotating the

PROGRAMS dial clockwise.

Set the wash water temperature with the

TEMPERATURE knob.

Set the high spin speed with the

1.

2.

SPIN SPEED knob.

To further customize the program, press

one of the four WASH OPTIONS buttons

(see Washing Options).

6. Open the dispenser drawer and add laundry aids

(see Dispenser drawer).

Note: If your previous washing machine was a

top-loader, initial loads may require little to no

detergent. Old detergent trapped in the clothes

will be released during the tumble action.

7. Close the dispenser drawer.

8. Press the ON-OFF button (in) to begin.

During the washing program, you cannot open

the door.

9. When the cycle is complete, wait for the DOOR

LOCK Light to extinguish. Open the door and

take your laundry out.

10. Unplug the washer.

Light

What it means...

Note

DOOR LOCK

Indicates when the

door is locked

Light ON = Locked
Light OFF = Unlocked


The door will stay locked for

up to 2 minutes after the

program is completed
NEVER attempt to open the

door when the DOOR LOCK

light is ON

ON-OFF Indicates the status

of the washer

Slow Flash = Ready; awaiting

instructions
Solid Light = Program

accepted; in operation
Quick Flash = Program

competed, but door still

locked

This washer can perform self-

diagnostics in the event of a

problem. If needed, this light

will indicate a fault code by

displaying a specific series of

blinking lights.

Lights

!