Panasonic RRXS450E - Manual (Page 39)

VQT4J81
39
39
ENGLISH
The playback speed can be adjusted in 21 steps
from the slow speed of 0.5 times normal speed
(50%) to the fast speed of 2 times normal speed
(200%).
1 Press [F1 (SPEED)]
during playback.
2 Press [F1 (SLOW)] or [F2 (FAST)] to select
the speed and press [q OK] to enter.
Status indication
During playback,
the playback speed
is displayed.
The display will stop
blinking when the
speed is fixed.
Playback speed:
The playback speed can be adjusted in 10% steps for
speeds faster than normal speed (100%), and 5% steps
for speeds slower than normal speed.
Status indication during playback:
Normal speed playback, playback faster and playback
slower are displayed as “ ”, “ ” and “ ” respectively.
* The speed cannot be adjusted for playback using
folder cue ( ➜ page 49) or timer playback (➜ page 55).
* When the playback speed is other than 100%, voice
emphasis ( ➜ page 44) does not work.
Changing the playback speed
Playback repeats between the start point (A) and
finish point (B) if those points are set.
1 Press [ERASE/A-B&]
while playing.
The start point (A) is set and
“
” (lighting) and “ ”
(blinking) are displayed.
2 Press [ERASE/A-B&] at
the fi nish point (B).
The display changes to “ ”
(lighting) and repeat play starts.
Cancelling A-B Repeat:
Press [ERASE/A-B&], u, i or [STOP g/RETURN].
* You cannot set A-B Repeat when the time between
the start point (A) and finish point (B) is approx. 2
seconds or less.
* When only the start point (A) is set and playback
continues until the end of the file, the end becomes the
finish point (B) and A-B Repeat begins.
* A-B Repeat by setting the range using 2 files is not
possible.
A-B Repeat play
VQT4J81_RR-XS450_420-E_En.indd 39 VQT4J81_RR-XS450_420-E_En.indd 39 2012/05/29 9:35:46 2012/05/29 9:35:46