Recording – Panasonic RRXS450E User Manual
Page 16
VQT4J81
16
16
Recording
Screen display during recording:
1
2
3
4
5
6
7
1
Status indication
* : During recording
h : During recording pause, recording standby, past recording
standby
2
Folder name (
➜ page 12), File number
3
Level meter
Displays the volume input into this unit. (Stereo (L/R))
L and R volumes are displayed respectively during monaural
recording (
➜ page 25) as well. Note that the monaural
recording data are synthesised from L and R.
4
Recording mode (
➜ page 25)
5
OVER indication
If the input volume is excessive and the level meter swings,
“
” is displayed.
6
Possible remaining recording time
Displays the remaining recording time (possible recording time)
in the selected recording mode.
7
Microphone sensitivity (
➜ page 26)
See page 6 for other screen displays.
Note when recording
This unit is equipped with a high-sensitivity
microphone. Accordingly, if a breath or wind
directly hits the microphone during recording,
the wind-cutting sound may be recorded or
voice may be difficult to hear.
1. This can be
prevented by
blocking the
wind with your
body so that
the wind does
not directly hit the unit.
Keep distance
2. During dictation
recording, slightly
move this unit
from front of your
mouth or keep
distance.
Turning the “LOW CUT FILTER” (
➜ page 26) to
“ON” reduces the sound of low frequency range.
This may help the reduction of the wind-cutting
sound.
*
Sound may jump during recording (especially
PCM recording) depending on use conditions
of the internal memory and SD card.
Formatting them on this unit (
➜ page 60)
before recording is recommended.
VQT4J81_RR-XS450_420-E_En.indd 16
VQT4J81_RR-XS450_420-E_En.indd 16
2012/05/29 9:35:42
2012/05/29 9:35:42