beautypg.com

Past recording function (pre-record) – Panasonic RRXS450E User Manual

Page 32

background image

VQT4J81

32

32

Past recording function (PRE-RECORD)

To set the past recording to ON:

• Press [STOP g/RETURN] to stop the unit.

1

Press [MENU].

2

Press +, – to select “MIC REC MENU”
and press [
q OK] to enter.

3

Press +, – to select
“PRE-RECORD” and
press [
q OK] to enter.

4

Press +, – to select “ON”
and press [
q OK] to enter.

(The factory setting is “OFF”.)

To exit the setting screen, press [F2 (CLOSE)].

To record using the past recording

function:

When recording mode is PCM, the past recording
function does not operate.

• Set the recording mode to MP3. (

➜ page 25)

• Press [STOP g/RETURN] to stop the unit.

If you start recording from the standby state of the past recording function, recording can be started

with the audio approx. 3 seconds before the recording operation.

1

Press and hold [REC *] for 1 second or more.

The unit enters the past

recording standby mode.

Changes to 1 sec, 2 sec, 3

sec and stops at 3 sec. The

microphone audio data approx.

3 seconds before recording are

always updated and the unit is

on standby.

2

Press [REC *].

The recording indicator lights, and recording is started

continuing directly after the preserved audio data.

To stop: Press [STOP g/RETURN].

*

The sound that occurs when the recording button is pressed

is also recorded. (When the built-in microphone is used, etc.)

*

When the recording level adjustment (

➜ page 27) is set

to MANUAL, the unit enters the past recording standby

and recording standby at the same time.

*

When the unit enters the standby state again after the

microphone position is switched (

➜ page 14), the past

recording standby screen is cancelled on the menu or

the stop operation is performed, audio data is freshly-

stored from that point.

*

The past recording function operates when recording

actually starts. It does not operate when recording is

paused.

*

If the recording remaining time is less than 10 seconds,

the past recording function does not operate.

VQT4J81_RR-XS450_420-E_En.indd 32

VQT4J81_RR-XS450_420-E_En.indd 32

2012/05/29 9:35:45

2012/05/29 9:35:45

This manual is related to the following products: