Ask Proxima C130 - Manual (Page 37)

37
Advanced menu
Sharpness : (video sources only) changes the clarity of the edges of a video
image. Select a sharpness setting.
Color Space : This option applies to computer and component video
sources. It allows you to select a color space that has been specifically tuned
for the input signal. When Auto is selected, the projector automatically
determines the standard. To choose a different setting, turn off Auto, then
choose RGB for computer sources, choose either SMPTE240, REC709 or
REC601 for component video sources.
Color Temperature : changes the intensity of the colors. Select a listed rela-
tive warmth value.
Color Control : allows you to individually adjust the gain (relative warmth
of the color) and the offset (the amount of black in the color) of the red,
green, and blue colors.
Video Standard : when it is set to Auto, the projector attempts to automati-
cally pick the video standard based on the input signal it receives. (The
video standard options may vary depending on your region of the world.) If
the projector is unable to detect the correct standard, the colors may not
look right or the image may appear “torn.” If this happens, manually select
a video standard by selecting NTSC, PAL, or SECAM from the Video Stan-
dard menu.
Overscan : (video sources only) removes noise around the video image.
Sync Threshold Adjust : (progressive signals only) If a hardware device,
such as a DVD player, is not syncing properly with the projector, select this
option to help it to sync when connected to the projector.
The following four (4) options are for progressive and computer sources
only.
Phase : adjusts the horizontal phase of a computer source.
Tracking : adjusts the vertical scan of a computer source.
Horizontal/Vertical Position : adjusts the position of a computer source.
White Peaking : increases the brightness of whites that are near 100%.
Advanced menu
Sharpness
Color
Space Color
Temperature
Color Control
Video Standard