Alliance Laundry Systems UX18PVQM7 - Manual (Page 12)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001001 10
Preliminary Information
About the Control
WE-8 computer on the washer-extractor is an
advanced, programmable computer that allows the
owner to create wash programs.
The control is factory set-up with 42 pre-programmed
cycles and is ready for operation. Refer to Pre-
Programmed Cycles section in the Programming
manual.
WE-8 allows the owner to program custom cycles on
the machine or with a PC and the Alliance planner
software.
IMPORTANT: In the event of a power failure,
WE-8 will not have to be reprogrammed. It is
designed with a memory system that will remember
how it was programmed until the electrical power
is restored.
Power Failure Recovery
If a cycle is in process and the power fails, cycle status
is saved in memory without power being applied.
If power resumes, the control will enter into the Start
Mode at the beginning of the cycle step where the
power failed.