Asus P4P800S-X - Manual (Page 13)

ASUS P4P800S-X motherboard 1-3
Serial ATA solution
The motherboard supports two interfaces compliant to the Serial ATA (SATA)
specification, an evolutionary replacement of the Parallel ATA storage interface.
The Serial ATA specification allows for thinner, more flexible cables with lower pin
count, reduced voltage requirement, up to 150 MB/s data transfer rate, and
software compatibility with legacy Parallel ATA. See page 1-22.
CrashFree BIOS 2
This feature allows you to restore the original BIOS data from a floppy disk or
support CD in case when the BIOS codes and data are corrupted. This protection
eliminates the need to buy a replacement ROM chip. See page 2-6.
AGP 8X support
AGP 8X (AGP 3.0) is the next generation VGA interface specification that enables
enhanced graphics performance with high bandwidth speeds up to 2.12 GB/s. With
a bus of 533Mhz, AGP 8X is twice as fast as AGP 4X. See page 1-14.
USB 2.0 technology
The motherboard implements the new Universal Serial Bus (USB) 2.0
specification, extending the connection speed from 12 Mbps on USB 1.1 to a fast
480 Mbps on USB 2.0. See page 1-16.
10/100 Mbps LAN support
Easy connectivity to your network or broadband connection with the onboard LAN
port. See pages 1-17, 3-3.
6-channel digital audio
The ADI AD1888 AC’97 audio CODEC onboard provides 6-channel audio playback
for 5.1 surround sound using digital audio devices via a Sony/Philips Digital
Interface (S/PDIF) jack located at the rear panel I/O. See pages 1-17, 3-3.
ASUS MyLogo™
This feature present in the motherboard allows you to personalize and add style to
your system with customizable boot logos. See pages 2-29.