3 summary of commands, Multitasker – Altinex Computer/Component Video+ Audio Dual Twisted Pair Transmitter MT115-110 User Manual
Page 16
MULTITASKER
400-0433-003
15
Example:
G5 consists of the C2, C4, and C6. Remove
only C4 and C6 from the group by sending the
command [RMC4C6G5]. The system will return
the following feedback:
[G5=C2]
24. [RMG]
This command may be used to delete an entire
group, or all groups.
REMOVE A GROUP
Remove all the members from the group,
effectively deleting the group.
Command Format: [RMGk]
Gk = Group ID (k = # from 1-8)
Example:
G5 consists of the C2, C4, and C6. Remove all
cards from the group by sending the command
[RMG5]. The system will return the following
feedback:
[G5=0]
REMOVE ALL GROUPS
Remove all the members from every group,
effectively deleting all groups.
Command Format: [RMG
*
]
Example:
G5 consists of C2, C4, and C6. G2 consists of
C1, C2, C3, C4, and C5. Delete all the groups
by sending the command [RMG
*
]. The system
will return the following feedback:
G1-G8: EMPTY
25. [RD]
This command reads and then displays the
members in a group.
Command Format: [RDGk]
Gk = Group ID (k = # from 1-8)
Example:
C2, C4, and C6 make up G5. Read the member
data for G5 by sending the command [RDG5].
The system will return feedback as follows:
[G5=C2C4C6]
The feedback shows G5 and then the cards that
make up G5. In this case, G5 includes C2, C4,
and C6.
7.3 SUMMARY OF COMMANDS
Card Commands
1)
[VER]
Display firmware version
2)
[C]
Display card status
3)
[CnS]
Save card settings
4)
[?]
Display system status
5)
[?C]
Display card status
6)
[STA1]
Enable auto feedback
7)
[STA0]
Disable auto feedback
8)
[CLR]
Reset card to defaults
9)
[TEST]
Test memory ICs
10) [EQ]
Display/select equalization
11) [EQ=]
Set equalization level
12) [GAIN]
Display/select video gain
13) [GAIN=]
Set video gain level
14) [HELP]
Display available commands
15) [...S]
Save command setting
16) [FBD]
Enable/disable feedback delay
ID Commands
17) [RSI]
Reset Card IDs
18) [SIDn]
Set all Card IDs
19) [SIDnCi]
Set one Card ID
20) [SID+n]
Set Card ID offset
21) [RSN]
Read Card slot number