AVerMedia Technologies NV 6000 EXP User Manual
Page 39
NV3000/5000/6000(EXP)/7000H User Manual
30
Name
Function
(5) Emap
Display the map in each area, and the location of camera/ sensor/ relay
and the warning. (see also
)
(6) Network
Enable/disable remote system access. This feature allows you to
access NV DVR server from a remote location via internet connection.
(see also
(7) Setup
Configure the system settings. (see also
)
(8) PTZ
Access PTZ control panel. Beside PTZ camera, NV DVR system also
support mega pixel IP camera. (see also
(9) Preview
Switch to Preview/Advanced mode. This allows you to view live camera
display.
(10) Playback
Switch to Playback mode. This allows you to view the recorded video
file. (see
(11) Status Bar
Display the current date, time and hard disk free space.
(12) Camera ID
Show the number of cameras that are being viewed. When you are in
single screen mode, click the camera ID number to switch and view
other camera.
(13) Snapshot
Capture and save the screen shot either in *.jpg or *.bmp format.
(14) Event log
Show the record of activities that take place in the system. (also see
)
(15) AutoScan
Start/Stop video screen cycle switch. (see also
(16) Full screen
Use the entire area of the screen to only display the video. To return,
press the right button of the mouse or ESC on the keyboard or click the
arrow icon.
When you switch to full screen in multiple-screen mode, Left click to
toggle to only display one of the video in the multiple-screen mode or
all.
(17) Alarm
Alert and display warning info. Only Administrator-level can reset and
turn on, off and trigger the Sensor and Relay by right-clicking the item in
the Sensor and Relay list.
(18) On Screen
Keyboard
If the keyboard is not available, you may use the Virtual Keyboard.
Click the
arrow icon to
leave from full
screen display
mode