Sony CMT-FX300i - Manual (Page 2)

CMT-FX300i.GB.4-178-508-11(1)
Using optional audio components
1 Prepare the sound source.
Connect additional audio component to the AUDIO
IN jack  on the unit using an audio analog cord
(not supplied).
2 Turn down the volume.
Press VOLUME  .
3 Select the AUDIO IN function.
Press FUNCTION +/  repeatedly.
4 Start playback.
Start playback of the connected component and adjust
the volume.
Note
The system may enter standby mode automatically if the volume
level of the connected component is too low. Adjust the component’s
volume accordingly. See “To turn off the automatic standby function.”
Adjusting the sound
To Press
Adjust the volume VOLUME +/ .
Generate a more
dynamic sound
(Dynamic Sound
Generator X-tra)
DSGX  on the unit.
Set the sound
effect
EQ .
Changing the display
To Press
Change
information on
the display*
DISPLAY  repeatedly when the
system is on.
Check the clock
when the system
is off
DISPLAY  when the system is off.
The clock is displayed for 8 seconds.
* For example, you can view CD/MP3 disc information, such as;
 track or file number during normal play.
 track or file name (“ ”) during normal play.
 artist name (“ ”) during normal play.
 album or folder name (“ ”) during normal play.
 total playing time and total number of tracks on the CD-DA
disc (only when normal play mode is selected and the player is
stopped).
 total number of folders (albums) on the MP3 disc (only when
normal play mode is selected and the player is stopped).
 volume label if it exists on the MP3 disc.
Notes on the display information
 Characters that cannot be displayed appear as “_”.
 The following are not displayed;
 total playing time for an MP3 disc.
 remaining playing time for an MP3 file.
 The following are not displayed correctly;
 elapsed playing time of an MP3 file encoded using VBR (variable
bit rate).
 folder and file names that do not follow either the ISO9660
Level 1, Level 2 or Joliet in the expansion format.
 The following are displayed;
 remaining playing time for a track.
 ID3 tag information for MP3 files when ID3 version 1 and
version 2 tags are used (ID3 version 2 tag information display has
priority when both ID3 version 1 and version 2 tags are used for a
single MP3 file).
 up to 32 characters of ID3 tag information using uppercase letters
(A to Z), numbers (0 to 9), and symbols (˝ $ % ’ ( ) * + , – . / < = >
@ [ \ ] _ ` { | } ! ? ^ ~ ).
Using the timers
The system offers two timer functions. If you use both
timers, the Sleep Timer has priority.
Sleep Timer:
You can fall asleep to music. This function works even if
the clock is not set.
Press SLEEP  repeatedly. If you select “AUTO,” the
system automatically turns off after the current disc stops,
or within 100 minutes.
Play Timer:
You can wake up to CD, FM/AM reception or iPod at a
preset time.
Make sure you have set the clock.
1 Prepare the sound source.
Prepare the sound source, and then press VOLUME
+/  to adjust the volume.
To start from a specific CD track or audio file, create
your own program.
2 Select the timer set mode.
Press TIMER MENU .
3 Set the play timer.
Press /  repeatedly to select “PLAY SET,” then
press .
4 Set the time to start playback.
Press /  repeatedly to set the time, then press
.
5 Use the same procedure as in step 4 to set the time
to stop playback.
6 Select the sound source.
Press /  repeatedly until the desired sound
source appears, then press .
7 Turn off the system.
Press  . The system turns on 15 seconds before
the preset time.
If the system is on at the preset time, the Play Timer
will not play. Do not operate the system from the time
the system turns on until the playback starts.
To check the setting
1
Press TIMER MENU .
2 Press /  repeatedly to select “SELECT,” and then
press .
3 Press /  repeatedly to select “PLAY SEL,” and
then press .
To cancel the timer
Repeat the same procedure as above until “OFF” appears
in step 3, and then press .
To change the setting
Start over from step 1.
Notes for the iPod user
 Make sure the iPod is not playing when using the Play Timer.
 The Play Timer may not be activated depending on the status of the
connected iPod.
Tip
The Play Timer setting remains as long as the setting is not cancelled
manually.
Troubleshooting
1 Make sure the power cord and speaker cords are
correctly and firmly connected.
2 Find your problem in the checklist below, and take
the indicated corrective action.
If the issue persists, contact your nearest Sony dealer.
If “PROTECT” appears on the display
Immediately unplug the power cord, and check the
following items after “PROTECT” disappears.
 Are the + and  speaker cords short-circuited?
 Is anything blocking the ventilation holes of the
system?
After you have checked these above items and found
to be all right, reconnect the power cord, and turn on
the system. If the issue persists, contact your nearest
Sony dealer.
General
The system does not turn on.
 Is the power cord plugged in?
The system has entered standby mode
unexpectedly.
 This is not a malfunction. The system enters standby
mode automatically in about 30 minutes when there is
no operation or audio signal output. See “To turn off
the automatic standby function.”
The clock setting or the Play Timer operation
has been cancelled unexpectedly.
 If about a minute elapses with no operation, the clock
setting or Play Timer setting is cancelled automatically.
Perform the operation again from the beginning.
There is no sound.
 Are the + and  speaker cords short-circuited?
 Are you using only the supplied speakers?
 Is anything blocking the ventilation holes of the system?
 The specified station may have temporarily stopped
broadcast.
Sound comes from one channel, or the left and
right volumes are unbalanced.
 Place the speakers as symmetrically as possible.
 Connect only the supplied speakers.
Severe hum or noise.
 Move the system away from sources of noise.
 Connect the system to a different wall outlet.
 Install a noise filter (available separately) to the power
cord.
The remote does not function.
 Remove any obstacles between the remote and the
remote sensor  on the unit, and position the unit
away from fluorescent lights.
 Point the remote at the system’s sensor.
 Move the remote closer to the system.
CD/MP3 player
The sound skips, or the disc will not play.
 Wipe the disc clean, and replace it.
 Move the system to a location away from vibration (for
example, on top of a stable stand).
 Move the speakers away from the system, or place them
on separate stands. At high volume, speaker vibration
may cause the sound to skip.
Play does not start from the first track.
 Return to Normal Play by pressing PLAY MODE 
repeatedly until both “PGM” and “SHUF” disappear.
Starting playback takes more time than usual.
 The following discs can increase the time it takes to
start playback;
 a disc recorded with a complicated tree structure.
 a disc recorded in multisession mode.
 a disc that has not been finalized (a disc to which data
can be added).
 a disc that has many folders.
To turn off the automatic standby function
This system is equipped with an automatic standby
function. With this function, the system enters standby
mode automatically in about 30 minutes when there is no
operation or audio signal output.
By default, the automatic standby function is turned on.
Use buttons on the unit to turn off the automatic standby
function.
Hold down   while the system is on, until
“AUTO. STBY OFF” appears.
To turn on the function, repeat the procedure until
“AUTO. STBY ON” appears.
Notes
 “AUTO STANDBY” lights up in the display when the automatic
standby function is turned on.
 The automatic standby function is invalid for the tuner functions
(FM/AM), even when “AUTO STANDBY” lights up in the display.
 The system may not enter standby mode automatically in the
following cases;
 when an audio signal is detected.
 when an iPod is connected.
 during playback of audio tracks or files.
 while the preset Play Timer or Sleep Timer is in process.
Messages
FULL : You tried to program more than 25 tracks or files
(steps).
NO DISC : There is no disc in the player, or you have
loaded a disc that cannot be played.
NO STEP : All of the programmed tracks have been
erased.
NOT USED : You tried to perform a specific operation
under conditions where that operation is prohibited.
OVER : You have reached the end of the disc while
pressing   during playback or pause.
PUSH STOP : You pressed PLAY MODE  during
playback.
TIME NG : The Play Timer start and end times are set to
the same time.
Precautions
Discs that this system CAN play
 Audio CD
 CD-R/CD-RW (audio data/MP3 files)
Discs that this system CANNOT play
 CD-ROM
 CD-R/CD-RW other than those recorded in music CD
format or MP3 format conforming to ISO9660 Level
1/Level 2, Joliet
 CD-R/CD-RW recorded in multisession that have not
ended by “closing the session”
 CD-R/CD-RW of poor recording quality, CD-R/
CD-RW that have scratches or are dirty, or CD-R/CD-
RW recorded with an incompatible recording device
 CD-R/CD-RW which is finalized incorrectly
 Discs containing files other than MPEG 1 Audio Layer-
3 (MP3) files
 Discs of non-standard shape (for example, heart,
square, star)
 Discs that have adhesive tape, paper, or sticker attached
to them
 Rental or used discs with attached seals where the glue
extends beyond the seal
 Discs that have labels printed using ink that feels tacky
when touched
Notes on discs
 Before playing, wipe the disc with a cleaning cloth from
the center out to the edge.
 Do not clean discs with solvents, such as benzine,
thinner, or commercially available cleaners or anti-
static spray intended for vinyl LPs.
 Do not expose discs to direct sunlight or heat sources
such as hot air ducts, nor leave it in a car parked in
direct sunlight.
On safety
 Completely disconnect the power cord (mains lead)
from the wall outlet (mains) if it is not going to be used
for an extended period of time. When unplugging the
unit, always grip the plug. Never pull the cord itself.
 Should any solid object or liquid get into the system,
unplug the system, and have it checked by qualified
personnel before operating it again.
 The AC power cord can be changed only by a qualified
service facility.
On placement
 Do not place the system in an inclined position or in
locations that are extremely hot, cold, dusty, dirty, or
humid or lacking adequate ventilation, or subject to
vibration, direct sunlight or a bright light.
 Be careful when placing the unit or speakers on
surfaces that have been specially treated (for example,
with wax, oil, polish) as staining or discoloration of the
surface may result.
 If the system is brought directly from a cold to a warm
location or is placed in a very damp room, moisture
may condense on the lens inside the CD player, and
cause the system to malfunction. In this situation,
remove the disc, and leave the system turned on for
about an hour until the moisture evaporates.
On heat buildup
 Heat buildup on the unit during operation is normal
and is not cause for alarm.
 Do not touch the cabinet if it has been used
continuously at a high volume because the cabinet may
have become hot.
 Do not obstruct the ventilation holes.
On the speaker system
This speaker system is not magnetically shielded, and
the picture on nearby TV sets may become magnetically
distorted. In this situation, turn off the TV, wait 15 to
30 minutes, and turn it back on.
If there is no improvement, move the speakers far away
from the TV.
Cleaning the cabinet
Clean this system with a soft cloth slightly moistened
with a mild detergent solution. Do not use any type
of abrasive pad, scouring powder, or solvent, such as
thinner, benzine, or alcohol.
Specifications
Main unit
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
(The United States model only)
With 4 ohm loads, both channels driven, from 120  15,000 Hz; rated 5 watts
per channel minimum RMS power, with no more than 10% total harmonic
distortion from 250 milliwatts to rated output.
Amplifier section
DIN power output (rated): 4 watts + 4 watts (4 ohms at 1 kHz, DIN)
Continuous RMS power output (reference): 5 watts + 5 watts (4 ohms at 1 kHz, 10% THD)
Input
AUDIO IN (stereo mini jack): Sensitivity 550 mV, impedance 50 kilohms
Outputs
PHONES (stereo mini jack): Accepts headphones with an impedance of
8 ohms or more
SPEAKERS: Accepts impedance of 4 ohms
CD player section
System: Compact disc and digital audio system
Laser Diode Properties
Emission Duration: Continuous
Laser Output*: Less than 44.6µW
* This output is the value measurement at a distance of 200mm from the
objective lens surface on the Optical Pick-up Block with 7mm aperture.
Frequency response: 20 Hz  20 kHz
Signal-to-noise ratio: More than 90 dB
Dynamic range: More than 90 dB
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section:
Tuning range:
North American model: 87.5 MHz  108.0 MHz (100 kHz step)
Other models: 87.5 MHz  108.0 MHz (50 kHz step)
Antenna: FM lead antenna
Intermediate frequency: 225 kHz
AM tuner section:
Tuning range
North American model: 530 kHz  1,710 kHz (10 kHz step)
531 kHz  1,710 kHz (9 kHz step)
Australian model:
531 kHz  1,710 kHz (9 kHz step)
530 kHz  1,710 kHz (10 kHz step)
Other models:
531 kHz  1,602 kHz (9 kHz step)
530 kHz  1,610 kHz (10 kHz step)
Antenna: AM loop antenna
Intermediate frequency: 53 kHz
iPod section
Compatible iPod models:
iPod nano
5th generation
(video camera)
iPod touch
2nd generation/
iPod touch
Late 2009
iPod classic
120 GB
160 GB (2009)
iPod nano
4th generation
(video)
iPod classic
160 GB (2007)
iPod touch
1st generation
iPod nano
3rd generation
(video) iPod classic
80 GB
iPod nano
2nd generation
(aluminum)
iPod
5th generation
(video)
iPod nano
1st generation iPod
4th generation
(color display)
iPod
4th generation
iPod mini
Speaker
Speaker system: Full range, 8 cm dia., cone type
Rated impedance: 4 ohms
Dimensions (W/H/D): Approx. 148 mm × 240 mm × 127 mm
Mass: Approx. 1.23 kg net per speaker
General
Power requirements:
North American model: AC 120 V, 60 Hz
Australian model: AC 230 V  240 V, 50/60 Hz
Korean model: AC 220 V, 60 Hz
Thai model: AC 220 V, 50/60 Hz
Taiwan model: AC 120 V, 50/60 Hz
Other models: AC 220 V  240 V, 50/60 Hz
Power consumption: 25 watts
Dimensions (W/H/D) (excl. speakers):
Approx. 158 mm × 240 mm × 251.5 mm
Mass (excl. speakers): Approx. 2.2 kg
Supplied accessories: Remote Commander (1), FM lead/AM loop antenna (1)
Design and specifications are subject to change without notice.
 Standby power consumption: 0.5 W
 Halogenated flame retardants are not used in the certain printed
wiring boards.
iPod
There is no sound.
 Make sure the iPod is connected securely.
 Make sure the iPod is playing music.
 Adjust the volume.
The sound is distorted.
 Turn down the volume.
 Set the “EQ” setting of the iPod to “Off” or “Flat.”
The remote does not function.
 Make sure the iPod is connected securely.
 Make sure the iPod is updated with the latest software.
If not, update the iPod before using with the system.
The iPod cannot be charged.
 Make sure the iPod is connected securely.
 You can use the system as a battery charger for iPod
only when the system is on.
“PROTECT” appears.
 A problem has been detected with the level of electrical
current from the iPod connector. Turn off the system
and remove the iPod from the iPod connector. Make
sure there is no problem with the iPod. If this display
pattern persists, contact your nearest Sony dealer.
Tuner
Severe hum or noise, or stations cannot be
received. (“TUNED” or “ST” flashes on the
display.)
 Connect the antenna properly.
 Find a location and an orientation that provide good
reception, and then set up the antenna again.
 Keep the antennas away from the speaker cords and the
power cord to avoid picking up noise.
 Turn off nearby electrical equipment.
To change the AM tuning interval
The AM tuning interval is factory-preset to 9 kHz (or
10 kHz for some areas).
Use buttons on the unit to change the AM tuning
interval.
1 Tune in any AM station, and then turn off the
system.
2 Press DISPLAY  to display the clock.
3 While holding down  , press  .
All the AM preset stations are erased. To reset the
interval to the factory preset, repeat the procedure.
To improve tuner reception
Turn off CD player power by using the system’s power
management function. By default, CD player power is
turned on.
Use buttons on the unit to turn off the CD player power.
1 Press FUNCTION  repeatedly to select the CD
function.
2 Press   to turn off the system.
3 After “STANDBY” stops flashing, press DISPLAY 
to display the clock and then press   while
holding down  , until “CD POWER OFF” appears.
With CD player power turned off, access time is
increased. To turn on CD player power, repeat the
procedure until “CD POWER ON” appears.
To reset the system to factory settings
If the system still does not operate properly, reset the
system to factory settings.
Use buttons on the unit to reset the unit to its factory
default settings.
1 Disconnect and reconnect the power cord, and then
turn on the system.
2 While holding down FUNCTION  and + ,
press  .
All user-configured settings, such as preset radio
stations, timer, and the clock, are deleted.