I cannot perform a ir hotsync, Operation – Sony PEG-TH55 User Manual
Page 29
29
Sony Personal Entertainment Organizer PEG-TH55 US A-BU7-100-11 (1)
T
rou
bl
e
s
ho
o
ti
n
g
B Check that the IR port of your computer is enabled.
B The IR HotSync
®
operation is not available if your computer does not have
an IR port.
B Check that
(HotSync) is displayed in the task tray (Notification area) at
the bottom right of your computer window and HotSync Manager is
running. When HotSync Manager is running, the menu should be
displayed by clicking
(HotSync).
B If you are using Windows 2000 Professional/Windows XP, click
(HotSync) in the task tray (Notification area) at the bottom right of your
computer window and ensure [InfraRed] is selected.
B If you are using Windows Me, click
(HotSync) in the task tray
(Notification area) at the bottom right of your computer window and ensure
[Local Serial] is selected.
B If you are using Windows Me, click
(HotSync) in the task tray
(Notification area) at the bottom right of your computer window and click
[Local] in the Setup window. Then ensure [Serial Port] of the simulated
port for IR communication is selected.
B Ensure [Local] and [IR to a PC/handheld] are selected in the HotSync
screen on your CLIÉ handheld.
B Point the IR port of your CLIÉ handheld directly at the IR port of your
computer. The distance between the IR ports of your CLIÉ handheld and
computer should be 4 to 8 inches (approximately 10 to 20 centimeters). The
optimum distance for beaming may vary depending on devices.
B You cannot perform the IR HotSync
®
operation if the remaining battery
power is inadequate. After charging the battery of your CLIÉ handheld, try
the IR HotSync
®
operation again.
B Reduce the transmission speed.
Tap [IR to a PC/Handheld] in the Preferences screen for [Connection].
Then tap [Edit...], [Details...] and specify [Speed:] in the Details screen.
I cannot perform a IR HotSync
®
operation