beautypg.com

Hotsync manager does not start, Hotsync) is not, I cannot perform a hotsync – Sony PEG-TH55 User Manual

Page 26: Operation via a wireless lan, If you still cannot perform the hotsync, Operation

background image

26

Sony Personal Entertainment Organizer PEG-TH55 US A-BU7-100-11 (1)

B Reinstall Palm™ Desktop for CLIÉ.

B If a HotSync

®

operation is performed once, your computer's name is

displayed in [Primary PC Name:] in the Primary PC Setup screen, which
can be displayed by tapping [Primary PC Setup...] form [Options] in the
menu of the HotSync screen.
You need to delete this name the next time you perform the wireless LAN
HotSync

®

operation.

Tips

• If you enter “!!” as [Primary PC Name:], you do not need to delete the name every time you

perform the wireless LAN HotSync

®

operation.

• To perform a HotSync

®

operation using the wireless LAN function, you need to set up the

connection via a wireless LAN properly. Check the connection according to “I cannot
connect to the Internet via a wireless LAN” on page 32.

If you still cannot perform the HotSync

®

operation

If you cannot solve your HotSync

®

operation problem by following the

troubleshooting tips in this manual, follow the procedure below.

Check if any “Unknown device” is listed in the Device
Manager on your computer.

Note

This “Unknown device” may appear in the Device Manager only while your CLIÉ
handheld tries to connect to your computer. After your CLIÉ handheld has timed out and
displayed an error message on a window, it disconnects from your computer and this
“Unknown device”, if it was present, will disappear and you will not see it.

1

Right-click [My Computer] and select [Properties] from the

menu.

The System Properties window is displayed.

HotSync Manager

does not start.

(HotSync) is not

displayed in the task tray (Notification area) at the
bottom right of my computer window

I cannot perform a HotSync

®

operation via a wireless

LAN