Sony PEG-TH55 - Manual (Page 27)

27
Sony Personal Entertainment Organizer PEG-TH55 US A-BU7-100-11 (1)
T
rou
bl
e
s
ho
o
ti
n
g
2
If you are using Windows 2000 Professional/Windows XP,
click [Hardware].
3
Click [Device Manager].
4
Check if there is a device marked with or .
A device with such a mark is not operating normally. Contact the
manufacturer of the device to get information on the latest device drivers.
You cannot perform the HotSync
®
operation before
you install Palm™ Desktop for CLIÉ on your computer
If you perform the HotSync
®
operation before you install the CLIÉ handheld
drivers on your computer, other drivers may be installed on your computer and
a problem may occur in your computer system.
Make sure you install Palm™ Desktop for CLIÉ before performing the
HotSync
®
operation.
Do not use a USB hub
If you connect your CLIÉ handheld to your computer via a USB hub, you may
not be able to perform the HotSync
®
operation properly. Make sure you
connect the USB cable directly to a USB port of your computer.
Some computers have the hub function built into their internal circuitry.
Contact your computer manufacturer to check whether the USB port of your
computer is connected to an internal USB hub.
Check that the USB port of your computer is enabled
Test the USB port with another device, such as a USB mouse. If that device
does not work, check the BIOS setting of your computer.
In addition, check the setting in the Device Manager: Right-click [My
Computer] and select [Properties] from the menu. (If you are using Windows
2000 Professional/Windows XP, click [Hardware].) Click [Device Manager]
and check that [USB controller] is displayed in the Device Manager window.
If USB controller is not displayed
b For details, refer to the manual of your computer.
Verifying your CLIÉ handheld
B Check that you enter the correct phone number.
I cannot perform a HotSync
®
operation via a modem
Continued on next page
• • • • • • • • • • • • • • • • • • • •