Sony STR-DN1030 - Manual (Page 97)

97 US
D:\NORM'S JOB\SONY HA\SO130039\STR-DN1030_PMRF
06\4420297142_US\US05ENJ_STR-DN1030-CEL.fm masterpage: Right
STR-DN1030
4-420-297-14(2)
Adj
u
s
tin
g Setti
ng
s
EQ Settings menu
You can use the following parameters to adjust
the tonal quality (bass/treble level) of front
speakers.
• Bass
• Treble
Note
This function does not work when “A. DIRECT” is
being used.
Audio Settings menu
You can adjust settings for the audio to suit
your preference.
x D.L.L. (Digital Legato Linear)
The D.L.L. function is Sony proprietary
technology that allows low quality digital
audio signals and analog audio signals to be
played back with high quality sound.
• AUTO 1: This function is available for lossy
compression audio formats and analog audio
signals.
• AUTO 2: This function is available for
Linear PCM signals, as well as lossy
compression audio formats and analog audio
signals.
• OFF
Note
This function works when “2CH ST.”, “A.F.D.
AUTO”, “MULTI ST.” or “HP 2CH” is selected.
However, this function does not work in the
following cases.
– “FM TUNER” or “AM TUNER” input is selected.
– Linear PCM signals with a sampling frequency of
other than 44.1 kHz are being received.
– Dolby Digital Plus, Dolby Digital EX, Dolby
TrueHD, DTS 96/24, DTS-HD Master Audio, or
DTS-HD High Resolution Audio signals are being
received.
– During network function, signals with a sampling
frequency of other than 44.1 kHz is being
received.
x A/V Sync (Synchronizes audio
with video output)
Lets you delay the output of audio to minimize
the time gap between audio output and visual
display.
This function is useful when you use a large
LCD or plasma monitor or a projector.
• HDMI AUTO: The time gap between audio
output and visual display for the monitor
connected via an HDMI connection will be
adjusted automatically based on the
information for the TV. This feature is
available only when the monitor supports
the A/V Sync function.
• 0 ms – 300 ms: You can adjust the delay
from 0 ms to 300 ms in 10 ms intervals.
Notes
• This function does not work when “A. DIRECT” is
being used.
• The delay time may vary depending on audio
format, sound field, speaker pattern and speaker
distance settings.
x Dual Mono (Digital broadcast
language selection)
Lets you select the language you want when
you listen to the dual audio of a digital
broadcast when available. This feature only
functions for Dolby Digital sources.
• MAIN/SUB: Sound of the main language
will be output through the front left speaker
and sound of the sub language will be output
through the front right speaker
simultaneously.
• MAIN: Sound of the main language will be
output.
• SUB: Sound of the sub language will be
output.
Level
(dB)
Bass Treble
Frequency
(Hz)