Ariens Sno-Thro 932105 - 8526 - Manual (Page 6)

GB - 6
REQUIRED OPERATOR TRAINING
Original purchaser of this unit was instructed
by the seller on safe and proper operation. If
unit is to be used by someone other than
original purchaser; loaned, rented or sold,
ALWAYS provide this manual and any needed
safety training before operation.
SAFETY DECALS AND
LOCATIONS
ALWAYS replace missing or damaged Safety
Decals. Refer to figure below for Safety Decal
locations.
1. DANGER!
2. WARNING!
3. DANGER!
SAFETY RULES
Read, understand, and follow all safety
practices in Owner/Operator Manual before
beginning assembly or operating. Failure to
follow instructions could result in personal
injury and/or damage to unit.
ROTATING PARTS.
Keep clear of auger while engine
is running.
• Read Operator’s Manual.
• Allow operation only by
properly trained adult, never
children.
• Stop engine and remove
ignition key prior to leaving
the operator’s position for
any reason.
• Keep all controls, guards and
safety devices properly
serviced and functional.
• Never direct discharge
towards persons or property
that may be injured or
damaged by thrown objects.
1
2
3
OS2350
Figure 2
OS2080
Read Owner/Operator Manual.
Keep people away from unit while
operating. Keep children out of
work area and under watchful
care of a responsible adult.
Never direct discharge towards
persons or property that may be
injured or damaged by thrown
objects.
Stop engine, remove key, read
manual before making any
repairs, adjustments.
Wear appropriate hearing
protection.
ONLY use clean-out tool to clear
blockages. NEVER use your
hands.
ROTATING PARTS! ONLY use
clean-out tool to clear blockages.
NEVER use your hands. High
speed impeller rotates below
discharge opening. Wait for all
moving parts to stop before
removing clogs or servicing.
OL1801
OL4370
OL0910
OL4010
OL4690
OS6610