Sony PCG-NV100P - Manual (Page 23)

To play an audio CD
To play an audio CD, make sure the audio function is turned on. To do this, complete the following procedure.
1. Click Start, and click Control Panel, and Performance and Maintenance, and System. The System Properties
window appears.
2. Select the Hardware tab, and click Device Manager. The Device Manager window appears.
3. Double-click DVD/CD-ROM drives to open a list of the optical disc drive devices installed on your computer.
4. Right-click the particular optical disc drive device installed on your computer, and select Properties from the
drop-down list. A properties window appears.
5. Select the Properties tab, and check the "Enable digital CD audio for this CD-ROM device" box, if it is not already
checked.
6. Click OK.
Page 23