Sony PCG-NV100P - Manual (Page 20)

To insert a disc
1. Turn on the computer.
When the computer is in Standby or Hibernate mode, you cannot insert a disc. See Controlling Power
Management for more information on Standby and Hibernate modes.
2. Press the Eject button to open the optical disc drive. The tray slides out.
Ejecting the Tray
Avoid using adhesive labels to identify your discs. Adhesive labels may come off while the disc is in use in your
optical disc drive, and may cause damage to the unit.
3. Place an optical disc on the tray with the label side facing up. For DVDs that can played on both sides, the side of
the disc facing up is the side that plays.
4. Press the disc onto the hub until the disc clicks securely into place.
Inserting an Optical Disc
5. Close the tray by pushing it gently.
Page 20