Step 2: setting up the remote commander, Setting up the remote commander, Step 2 – Sony SLV-M91HF User Manual

Page 5

Text mode
Original mode

Step 2

Setting up the remote commander

Inserting the batteries

Insert two size AA (R6) batteries by
matching the + and – on the batteries
to the diagram inside the battery
compartment.
Insert the negative (–) end first, then
push in and down until the positive (+)
end clicks into position.

Using the remote commander

You can use this remote
commander to operate this VCR
and a Sony TV or AV receiver.
Buttons on the remote
commander marked with a dot
(•) can be used to operate your
Sony TV.
The RECEIVER VOL +/– and
MUTING buttons can be used to
operate your Sony AV receiver.

Remote sensor

To operate

the VCR

a Sony TV

TV / VIDEO

continued

MUTING

RECEIVER
VOL +/–

Set TV / VIDEO to

VIDEO and point at the remote sensor on the VCR

TV and point at the remote sensor on the TV