Sony DCR-TRV340 - Manual (Page 179)

179
Troubleshooting
Symptom Cause and/or Corrective Actions
• If 10 minutes elapse after you set the POWER switch to
CAMERA or DEMO MODE is set to ON in the menu
settings without a cassette inserted, your camcorder
automatically starts the demonstration.
c Insert a cassette and the demonstration stops.
You can also cancel DEMO MODE (p. 105).
• NIGHTSHOT is set to ON.
c Set it to OFF (p. 29).
• NIGHTSHOT is set to ON in a bright place.
c Set it to OFF (p. 29).
• The backlight function is active.
c Set it off (p. 28).
• BEEP is set to OFF in the menu settings.
c Set it to MELODY or NORMAL (p. 105).
• Set STEADYSHOT to OFF in the menu setting (p. 105).
• The power of the external flash is off or the power source
does not installed.
c Turn on the external flash or install the power source.
• Two or more external flashes are attached.
c Only one external flash can be attached.
• AUTO is selected in FLASH MODE in the menu settings
while recording in a bright place.
c Set it to ON (p. 105).
In the playback mode
Symptom Cause and/or Corrective Actions
• The POWER switch is not set to VCR.
c Set it to VCR (p. 34).
• The cassette has run out of tape.
c Rewind the tape (p. 34).
• The video heads may be dirty.
c Clean the heads using the Sony V8-25CLD cleaning
cassette (optional) (p. 195).
• The stereo tape is played back with HiFi SOUND set to 2
in the menu settings.
c Set it to STEREO (p. 105).
• The volume is turned to minimum.
c Press VOLUME + (p. 34).
• AUDIO MIX is set to the ST2 side in the menu settings.
c Adjust AUDIO MIX (p. 105).
• The tape has a blank portion between recorded portion
(p. 68).
• PB MODE is set to / in the menu settings.
c Set it to AUTO (p. 105).
• Set PB MODE to / in the menu settings (p. 105).
(continued on the following page)
Types of trouble and how to correct trouble
An unknown picture is displayed on
the screen.
The picture is recorded in incorrect or
unnatural colors.
Picture appears too bright, and the
subject does not appear on the
screen.
The shutter does not sound.
A horizontal black band appears
when shooting a TV screen or a
computer screen.
An external flash (optional) does not
work.
The tape does not move when a
video control button is pressed.
The playback button does not work.
There are horizontal lines on the
picture, or the playback picture is not
clear or does not appear.
No sound or only a low sound is
heard when playing back a tape.
The date search does not work
correctly.
The picture which is recorded in the
Digital8 system is not played back.
The tape which is recorded in the Hi8
/standard 8 system is not played
back correctly.