Sony DCR-PC100 - Manual (Page 96)

96
1 2
4
5
6
1
M. LUMI
M. LUMI
I I I • • • •
I • • • • • •
3
M. CHROM
M. LUMI
PLAY
+
–
POWER
LOCK VTR
MEMORY
CAMERA
OFF
Superimposing a still picture in a “Memory Stick” on a moving
picture – MEMORY MIX
Before operation
Insert a recorded “Memory Stick” and a mini DV tape to be recorded into your
camcorder.
(1) Set the POWER switch to CAMERA.
(2) Press MEMORY PLAY in the standby mode.
The last recorded or last composed image appears on the lower part of the
screen as a thumbnail image.
(3) Press MEMORY+/– or +/– on the Remote Commander to select the still
picture you want to superimpose.
To see the previous image, press MEMORY – or – on the Remote Commander.
To see the next image, press MEMORY+ or + on the Remote Commander.
(4) Turn the SEL/PUSH EXEC dial to select the desired mode.
The mode changes as follows:
M. CHROM
y M. LUMI y C. CHROM
(5) Press the SEL/PUSH EXEC dial.
The still picture is superimposed on the moving picture.
(6) Turn the SEL/PUSH EXEC dial to adjust the effect.
(7) Press START/STOP to start recording.
Still picture