Sony DCR-PC100 - Manual (Page 26)

26
DISPLAY
When monitoring on the LCD screen
You can turn the LCD panel over and move it back to the camcorder body with the
LCD screen facing out.
If you leave the power on for a long time
Your camcorder gets warm. This is not a malfunction.
When you open/close the LCD panel
Make sure that the LCD panel is set vertically.
To control the display of the screen indicators
Press DISPLAY on your camcorder or on the Remote Commander supplied with your
camcorder.
The indicators disappear from the LCD screen.
To make the indicators appear, press DISPLAY again.
Playing back a tape