Sony CFD E75 - Manual (Page 12)

12
The CD Player
Using the display
You can check information about the CD
using the display.
Checking the remaining time
Press DSPL•ENT MEM while playing a CD.
To display Press DSPL•
ENT MEM
the current track number once
and remaining time
on the current track*
the number of tracks left twice
and remaining time on the CD
the current track number three times
and playing time
* For a track whose number is more than 20, the
remaining time appears as “– –:– –”.
Total playing
time
Total track
number
DSPL
ENT MEM
Checking the total track
number and playing time
Press DSPL•ENT MEM in stop mode.
Locating a specific
track
You can quickly locate any track on a CD
using the number buttons on the remote.
You can also find a specific point in
a track while playing a CD.
To locate Press
a specific track directly the number button of
the track.
a point while listening to > (forward) or .
the sound
(backward) while
playing and hold down
until you find the point.
(On the player, use M
or m).
a point while observing > (forward) or .
the display (backward) in pause
and hold down until
you find the point.
(On the player, use M
or m).
Note
You cannot locate a specific track if "SHUF" or
"PGM" is lit in the display. Turn off the indication
by pressing x.
Tip
When you locate a track numbered over 10, press
>10 first, then the corresponding number buttons.
Example:To play track number 23, press >10 first,
then 2 and 3.
. , >
STANDBY SLEEP
POWER
CD/RADIO (AC ONLY)
VOL
TUNE
TUNE
FUNCTION
BAND
MODE 10 0/10
Number
buttons