Sony SLV-D100 - Manual (Page 87)

87 General setup information
Ad
di
ti
on
al
I
n
fo
rmati
o
n
Additional Information
General setup information
Changing setup options
Menu choices
Initial settings are indicated in bold print.
1 Press SET UP when the DVD player is in stop mode.
2 Press V/v/B/b to select (Option setup), then
press ENTER.
The “OPTION SETUP” menu appears.
3 Press V/v to select the option to change.
4 Press B/b to change the setting.
5 Press O RETURN repeatedly to exit the menu.
If you have changed the RF Output Channel, a confirmation message appears.
Press ENTER to confirm the changed channel.
Menu option Set this option to
RF Output Channel • 3CH when using channel 3 to receive the VCR signal.
• 4CH when using channel 4 to receive the VCR signal.
For details, see page 88.
Auto Power Off • 1Hr to turn off the VCR automatically one hour after the last
operation.
• 2Hr to turn off the VCR automatically two hours after the last
operation.
• Off to set no specific time to turn off.
DVD Setup
RETURN
SETUP MENU
Vv b B ENTER
RF Output Channel
Auto Power Off 3 CH
Off
RETURN
OPTION SETUP
v V
b B
continued