I cannot perform an ir hotsync, Operation – Sony PEG-TG50 User Manual

Page 23

I ca

nnot pe

rform a

HotS

operation

B Reduce the setting for transmission speed if any problem arises only when

the

Speed

setting in the

Setup/Modem

window is set to

As fast as

possible

or some other specific speed.

B Check that the

Speed

setting in the

Setup/Modem

window is

appropriate for your modem.

B Turn off the modem for a while and turn it on before connecting the

modem.

I cannot perform an IR HotSync

operation

B Check that the IR port of your computer is enabled.

B An IR HotSync

operation is not available if your computer does not have

an IR port.

B Check that the HotSync

icon is displayed in the task tray in the bottom

right-hand corner of your computer screen and the HotSync Manager is
running. When the HotSync Manager is running, the shortcut menu should
be displayed by clicking the HotSync

icon.

B If you are using Windows 2000 Professional/Windows XP, click the

HotSync

icon in the bottom right-hand corner of your computer screen

and check that the

Beaming

check box is selected.

B If you are using Windows 98 Second Edition/Windows Me, click the

HotSync

icon in the bottom right-hand corner of your computer screen

and check that the

Local Serial

check box is selected.

B If you are using Windows 98 Second Edition/Windows Me, click the

HotSync

icon in the bottom right-hand corner of your computer screen

and click the

Local

tab in the

Setup

window. Then check that the

simulated port for IR communication is selected in

Serial Port

B Check that

Local

and

IR to a PC/handheld

are selected in the

HotSync

screen on your CLIÉ handheld.

I cannot perform a HotSync

operation via a modem

Continued on next page

• • • • • • • • • • • • • • • • • • • •