Recording analog sound – Sony PCM-D50 User Manual
Page 23

23
Recor
ding
Recording analog sound
This section explains how to record analog
sound signals from the line output of an
external device or by using the built-in or
external microphones.
Recording using the built-in microphones
This sub-section explains how to record
sound sources in the built-in memory with
the built-in microphones.
To change sampling frequency, quantifying
bit number, or the memory drive for a
recording, go to the menu display (page 40).
The default sampling frequency and
quantifying bit number are “44.10 kHz
16 bit.”
1
Position the recorder and the built-in
microphones referring to “Preparation
before recording” (page 21).
2
Set the INPUT switch to the “
”
(microphones) position.
3
Press the
/MENU button.
The screen used to select a folder is
displayed.
Currently selected folder
Continued on the next page
PAUSE button/
indicator
REC LEVEL dial
Volume dial
INPUT switch
/
MENU button
REC button/
indicator
PLAY/ENTER
button
STOP button
FR/
button
FF/
button
jack
LINE IN (OPT)
jack