Sony DCR-HC26 User Manual
Page 63
63
E:\SONY\2659811111\01US06COM.fm
DCR-HC26
2-659-811-11(1)
Us
in
g a Com
put
er
3
Slide the POWER switch
repeatedly to turn on the PLAY/
EDIT lamp.
4
Insert a recorded cassette into
your camcorder.
5
Connect your camcorder to a
computer via an i.LINK cable
(p. 62).
• When you connect your camcorder to a
computer, make sure you insert the
connector in the correct way. If you insert
the connector forcibly, damage may occur
and cause camcorder malfunction.
• For details, see “First Step Guide” (p. 61).
6
Touch
t [PAGE2] t
[BURN DVD]
t
.
“Click to DVD” starts up and the on-
screen instructions appear on your
computer.
7
Place a writable DVD in the disc
drive of the computer.
8
Touch [EXEC] on the screen of
your camcorder.
The status of the operation on your
computer is displayed on the LCD
screen of your camcorder.
[CAPTURING]: The picture recorded
on the tape is being copied to the
computer.
[CONVERTING]: The picture is being
converted to the MPEG2 format.
[WRITING]: The picture is being
written onto the DVD.
• If you use a DVD-RW/+RW which has
other data stored on it, the message [This is
a recorded disc. Delete and overwrite?]
appears on the LCD screen of your
camcorder. When you touch [EXEC], the
existing data is erased and new data is
written.
9
Touch [
END] to finish creating
a DVD.
The disc tray comes out automatically.
To create another DVD with the same
content, touch [EXEC].
The disc tray comes out. Place a new
writable DVD in the disc drive. Then,
repeat step 8 and 9.
To cancel the operation
Touch [CANCEL] on the LCD screen on
your camcorder.
• You cannot cancel the operation after
[Finalizing DVD.] is displayed on the LCD
screen of your camcorder.
• Do not disconnect the i.LINK cable or set the
POWER switch to another mode on your
camcorder until the picture is completely copied
to the computer.
• When [CONVERTING] or [WRITING] is
displayed on the screen, capturing of pictures
has already finished. Even if you disconnect the
i.LINK cable or turn off the camcorder at this
BURN DVD
START
0:00:00:00
CREATE DVD?
EXEC
CAN-
CEL
60min
BURN DVD
COMPLETED
0:00:00:00
C r e a t e a n o t h e r
c o p y ?
D i s c t r a y
o p e n s .
EXEC
60min
END
Continued
,