ATEN CS-1762 - Manual (Page 29)

Chapter 4. Hotkey Operation
21
Auto Scanning
The CS1762
A
/ CS1764
A
’s Auto Scan feature automatically cycles the KVM
focus through the computer ports at regular intervals. This allows you to
monitor the computer activity without having to take the trouble of switching
from port to port manually. Although the video focus switches from port to
port, the keyboard, mouse, and USB focus doesn’t switch. They stay at the port
they were on when Auto Scanning started.See the table below for details. .
When you use the port switching hotkey or HSM, the mouse cursor must be in
the current computer display.
While Auto Scan Mode is in effect, ordinary keyboard and mouse functions are
suspended – only Auto Scan Mode compliant keystrokes and mouse clicks can
be input. You must exit Auto Scan Mode (press the Esc key or the Spacebar)
in order to regain normal control of the console.
Hotkey Action
[Scroll Lock] [Scroll
Lock] [A] [Enter] Invokes Auto Scan. The KVM focus cycles from port to port
at 5 second intervals. Five second intervals is the Default
setting.
[Scroll Lock] [Scroll
Lock] [A] [n] [Enter] The KVM focus cycles from port to port at n second intervals.
Note: The n stands for the number of seconds that the
CS1762A / CS1764A should dwell on a port before moving
on to the next. Replace the n with a number between 1 and
99 when entering this hotkey combination