Sony DVP-NS9100ES - Manual (Page 24)

24
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use . If the amplifier
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use .
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
z Hint
To realize better surround sound effects, make sure
that your listening position is in between your
speakers.
Notes
• Super Audio CD audio signals are not output from
the DIGITAL OUT (COAXIAL or OPTICAL)/
HDMI OUT jack.
• When the i.LINK indicator lights up, audio
signals are output from the i.LINK S200 AUDIO
jack, but not from any of the other jacks
(including HDMI OUT).
B
B-1
B-2
CD/DVD player
Stereo amplifier (receiver)
MD deck/DAT deck
Front (L)
Front (R)
[Speakers]
(white)
(red)
(red) (white)
Coaxial digital cord
(not supplied)
Stereo audio cord
(not supplied)
to audio input to coaxial or optical
digital input
to AUDIO OUT L/R
1 or 2 to DIGITAL OUT
(COAXIAL or OPTICAL)
l: Signal flow
Optical digital cord
(not supplied)
Remove plug cap
before connecting.
or