Sony HDR-PJ790V - Manual (Page 230)

"Handycam" User Guide Print Search
Operation Search
Before use
Getting started
Recording
Playback
Playing images on a TV
Saving images with an external
device
Using the Wi-Fi function
Customizing your camcorder
Troubleshooting
Maintenance and precautions
Contents list
Top page > Customizing your camcorder > Setup > 24p Mode (HDR-PJ780E/ PJ780VE/ PJ790E/
PJ790VE)
24p Mode (HDR-PJ780E/ PJ780VE/ PJ790E/ PJ790VE)
You can record 24p movies with changing the signal format.
1.
[Setup] [ General Settings] [24p Mode] [OK].
If you want to return the system to 50i mode, select [OK] in the [Cancel 24p Mode] screen.
Notes
The camcorder reboots each time you change the setting.
When you change the setting, formatting the recording media is required.
When you select [24p Mode], the following settings will be limited.
The movie recording format is limited to AVCHD 24p (FX, FH).
Depending on the connected TV, images may not be played back normally because the video
signal output from the camcorder is in the NTSC format.
You cannot set [
/ / Setting] and [ Frame Rate].
Back to top
Copyright 2013 Sony Corporation
221