Sony bloggie MHS-PM1 - Manual (Page 58)

58
MHS-PM1
4-135-530-11(1)
J:\ichihashi\works\cx20300\PDF\4135530111MHSPM1\090TV.fm
master:Left
Viewing images on a TV
Viewing images on a TV
You can view images on a TV screen by connecting the camera to a TV.
The connection or the image quality (HD (high definition)/SD (standard definition)) varies
depending on the type of TV or input jacks the camera is connected to.
• When using your camera abroad, it may be necessary to switch the video signal output to match that of
your TV color system (page 57).
• Image will not be displayed on the LCD screen when an image signal is output to TV.
Images recorded with HD (high definition) image quality are played back with HD (high
definition) image quality. Images recorded with SD (standard definition) image quality are
played back with SD (standard definition) image quality.
Connecting to a high definition TV
• If you connect only component video plugs, audio signals are not output. Connect the white and red plugs
to output audio signals.
• The output settings switches automatically according to the images played back. Therefore, the image
may be distorted when switching the mode on the connected TV.
• If you record movies in HD (high definition) image quality [1080 30P/720 30P] while connecting the
camera to a high definition TV with a component cable, the image output to the TV is shown in SD image
quality.
Component A/V cable
(supplied)
A/V OUT jack
Green/Blue/Red
White/Red