Sony bloggie MHS-PM1 - Manual (Page 53)

53
MHS-PM1
4-135-530-11(1)
J:\ichihashi\works\cx20300\PDF\4135530111MHSPM1\080SET.fm
master:Right
For details on the operation 1 page 48
Cu
st
omi
zin
g t
h
e s
et
tin
gs
Setup 1
1
The default settings are marked with .
Selects the brightness of the LCD backlight.
• When you connect your camera to the wall outlet (wall socket) using the supplied AC adaptor, [Bright] is
automatically selected for the setting.
• You can change the setting by tilting the multi-selector to v (DISP) longer.
• Selecting [Bright] uses up the battery charge faster.
Selects the sound produced when you operate the camera.
Selects the language to be used to display the menu items, warnings, and messages.
Initializes the setting to the default setting. Even if you execute this function, the images
stored in the internal memory are retained.
1 Select [Initialize] with the multi-selector tilt to v/V/b/B, then tilt to B.
2 Select [OK] with v, then press the multi-selector.
The message “Initialize all settings” appears.
3 Select [OK] with v, then press the multi-selector.
The settings are reset to the default setting.
To cancel the resetting
Select [Cancel] in step 3, then press the multi-selector.
• Be sure not to turn the power of the camera off while initializing.
LCD Backlight
Bright Brightens.
Normal
Beep
Shutter Turns on the shutter sound when you press PHOTO.
On Turns on the beep/shutter sound when you press the multi-
selector, PHOTO or MOVIE button.
Off Turns off the beep/shutter sound.
Language
Initialize