Usb-ply/edt, Data code remaining remote ctrl, Rec lamp – Sony DCR-TRV480 User Manual

Page 83

g t
h

Using the Menu

USB-PLY/EDT

You can connect a USB cable (supplied) to your camcorder, and view the picture
on the tape or “Memory Stick” in your camcorder on your computer. For details,
refer to “First Step Guide” in the supplied CD-ROM.

DATA CODE

REMAINING

REMOTE CTRL

Note

• The setting returns to [ON] when you have the power source disconnected from your

camcorder for more than 5 minutes.

REC LAMP

GSTD-USB

Select to view the picture on the “Memory Stick.”

PictBridge

Select to connect the PictBridge compliant printer (p. 104).

USB STREAM

Select to view the picture on the tape.

GOFF

Select not to display date, time and the camera settings data during
playback.

DATE/TIME

Select to display the date and time during playback (p. 57).

CAMERA DATA

Select to display the camera settings data during playback (p. 57).

GAUTO

Select to display the remaining tape indicator for about 8 seconds:
• After you select the CAMERA-TAPE mode with the cassette

inserted, and your camcorder calculates the remaining amount of
tape.

• When you touch

(play/pause).

Select to always display the remaining tape indicator.

GON

Select when using the Remote Commander supplied with your
camcorder.

OFF

Select to deactivate the Remote Commander to prevent your
camcorder from responding to a command sent by another VCR
remote control unit.

GON

Select to turn on the camera recording lamp on the front of your
camcorder during recording.

,continued