Changing the spectrum analyzer display, Adjusting the brightness of the display, Enhancing the video game sound – Sony MHC-GX8000 User Manual
Page 18: Mixing the sound
18
GB
MHC-RG77 4-238-409-11 (2)
Other Features
Changing the spectrum
analyzer display
Press SPECTRUM.
Each time you press the button, the display
changes cyclically as follows:
SPECTRUM 1
t SPECTRUM 2 t
SPECTRUM 3
t PATTERN 1 t
PATTERN 2
t PATTERN 3 t
PATTERN OFF
Adjusting the brightness
of the display
Press DIMMER.
Each time you press the button, the display
changes cyclically as follows:
DIMMER 1
t DIMMER 2 t DIMMER 3
Enhancing the video game
sound
— Game Sync
You need to connect a video game player
(see “Connecting a Video Game Player” on
page 22).
Press GAME.
Tips
• In standby mode, the system automatically turns on.
• The previously selected GAME EQ is automatically
selected.
• This operation cannot be performed in the Power
Saving Mode.
Mixing the sound
— Game Mixing
You can mix the sound from the component
connected to the GAME INPUT jacks with
another function such as CD, tape, radio or
an MD connected to this system.
1
Select source sound you want.
2
Press GAME MIXING.
Each time you press the button, the level of
the game sound changes cyclically as
follows:
MIXING LOW
t MIXING MID t
MIXING HIGH
t MIXING OFF
Tips
• To record the mixed sound, press GAME MIXING
after step 4 of “Recording Manually” on page 13
and then press REC PAUSE/START to start
recording.
• The GAME MIXING indicator lights up while
Game Mixing is activated and it will remain active
while the power is on even if the function is
changed.
Notes
• Game Mixing is cancelled when you press REC
PAUSE/START.
• Game Mixing does not function during High Speed
Dubbing and CD Synchro Recording.